In order for the battery to be inserted, the key must be inserted into the battery lock and the lock must be open. The first battery needs to be placed in the left holder. An optional second battery can be placed in the right holder.
To insert the standard battery, place it onto the contacts on the lower holder on the Carqon (the battery can be titled towards the frame by up to 7°).
How to insert the battery?
Tilt it into the upper holder as far as possible until you hear it click into place. Check that the battery is secure in all directions. Always secure the battery by closing the lock – otherwise the lock may open and the battery may fall out of the holder.
How to remove the battery?
To remove the standard battery, switch it off and open the lock using the key. Tilt the battery out of the upper holder and pull it out of the lower holder.
Note: Always remove the key from the lock after closing it. This prevents both the key from falling out and the battery from being removed by unauthorized third parties when the e-bike is not in use.