On the road with the sturdy 2-seat cushion from Carqon. Available in the colors red, light gray and black.

Install the seat cushion

Remove the shoulder pads from all seat belts.

Remove the bench by pressing the two pins underneath towards the middle and pull out the bench.

Lay down the cushion backside up. Place the bench on the bottom of the cushion with the pins up and fasten the Velcro fasteners.

Push the pins on the side of the bench towards the middle and downwards so they will stay in position.

Place back the bench with the cushion upwards. Make sure all pins will go into the holes of the box.

Guide all seat belts through the openings of the cushion and place back the shoulder pads.

Attach the buttons of both straps on each backside of the cushion to the box.

Enjoy your ride!