Headlights must be set up in such a way that oncoming road users are not blinded.
- Loosen the screw (1) by several turns in an anti-clockwise direction.
- Set up the headlights in such a way as described in “Setting up the headlight range”.
- Affix the headlights by tightening the screw (1) in a clockwise direction.
Setting up the headlight range
The headlights must be set up in such a way that the light beam emitted is at half the height of the
headlight at a distance of 5 m/16.4 ft.
- Switch the headlights on in order to check the direction of the light beam being emitted.
- Loosen the screw (1) by several turns in an anti-clockwise direction.
- Set up the headlights correctly as described above, by tipping them forwards and backwards.
- Secure the headlights by tightening the screw (1) in a clockwise direction.